References

2021

In-line characterization of nanostructures produced by roll-to-roll nanoimprinting
Jonas Skovlund Madsen, Mathias Geisler, Mikkel Berri Lotz, Maksim Zalkovskij, Brian Bilenberg, Petri Peltonen, Poul Erik Hansen, and Søren Alkærsig Jensen. Optics Express, vol. 29, Issue 3.

2019

Low-cost, durable master molds for thermal-NIL, UV-NIL, and injection molding
Feyza Dundar Arisoy, Ilja Czolkos, Alicia Johansson, Theodor Nielsen and James J Watkins. IOP Science, Nanotechnology, volume 31, number 1 (2019)

Fabrication of 3D microstructure array on chip for rapid pathogen detection
Kant, K., Anh, T. N., Matteucci, M. & Wolff, A., 2019, In : Sensors and Actuators B: Chemical. 281, p. 774-782. Research output: Contribution to journal › Journal article – Annual report year: 2019 › Research › peer-review

2018

Single-molecule DNA-mapping and whole-genome sequencing of individual cells
R Marie, JN Pedersen, L Bærlocher, K Koprowska, M Pødenphant, … Proceedings of the National Academy of Sciences 115 (44), 11192-11197

VO2 Thermochromic Metamaterial-Based Smart Optical Solar Reflector
K Sun, CA Riedel, A Urbani, M Simeoni, S Mengali, M Zalkovskij, … ACS Photonics 5 (6), 2280-2286

Sequencing Metrics of Human Genomes Extracted from Single Cancer Cells Individually Isolated in a Valveless Microfluidic Device
R Marie, M Pødenphant, K Koprowska, L Bærlocher, RCM Vulders, … bioRxiv, 258780

A polymeric chip system and uses thereof
Hung, T. Q., Chin, W. H., Sun, Y., Wolff, A., Bang, D. D. & Matteucci, M., 2018, IPC No. G01N21/64, Patent No. WO2018046689 , 15 Mar 2018, Priority date 8 Sep 2016, Priority No. EP20160187819. Research output: Patent › Patent – Annual report year: 2018

Injection molded lab-on-a-disc platform for screening of genetically modified E. coli using liquid-liquid extraction and surface enhanced Raman scattering
Morelli, L., Serioli, L., Centorbi, F. A., Jendresen, C. B., Matteucci, M., Ilchenko, O., Demarchi, D., Nielsen, A. T., Zor, K. & Boisen, A., 2018, In : Lab on a Chip. 9 p. Research output: Contribution to journal › Journal article – Annual report year (2018)

Dataset for VO2 thermo-chromic metamaterial-based smart optical solar reflector
K Sun, C Riedel, A Urbani, M Simeoni, S Mengali, M Zalkovskij, … University of Southampton

Sequencing of human genomes extracted from single cancer cells isolated in a valveless microfluidic device
R Marie, M Pødenphant, K Koprowska, L Bærlocher, RCM Vulders, … Lab on a Chip 18 (13), 1891-1902

Concentrating and labeling genomic DNA in a nanofluidic array
R Marie, JN Pedersen, KU Mir, B Bilenberg, A Kristensen. Nanoscale 10 (3), 1376-1382

Injection-Molded Microfluidic Device for SERS Sensing Using Embedded Au-Capped Polymer Nanocones
Viehrig, M., Thilsted, A. H., Matteucci, M., Wu, K., Catak, D., Schmidt, M. S., Zor, K. & Boisen, A., 2018, In : ACS Applied Materials and Interfaces. 10, 43, p. 37417-37425. Research output: Contribution to journal › Journal article – Annual report year: 2018 › Research › peer-review

Laser ablation and injection moulding as techniques for producing micro channels compatible with Small Angle X-Ray Scattering
Haider, R., Marmiroli, B., Gavalas, I., Wolf, M., Matteucci, M., Taboryski, R., Boisen, A., Stratakis, E. & Amenitsch, H., 2018, In : Microelectronic Engineering. 195, p. 7-12. Research output: Contribution to journal › Journal article – Annual report year: 2018 › Research › peer-review

2017

Hierarchical surfaces for enhanced self-cleaning applications 
A Fernández, A Francone, LH Thamdrup, A Johansson, B Bilenberg, … Journal of Micromechanics and Microengineering 27 (4), 045020

Design of hierarchical surfaces for tuning wetting characteristics
A Fernández, A Francone, LH Thamdrup, A Johansson, B Bilenberg, … ACS applied materials & interfaces 9 (8), 7701-7709

Measuring multiple nano-textured areas simultaneously with imaging scatterometry
JS Madsen, PE Hansen, B Bilenberg, J Nygård, MH Madsen. 16th International Conference of the European Society for Precision …

Enrichment of megabase-sized DNA molecules for single-molecule optical mapping and next-generation sequencing
JM Łopacińska-Jørgensen, JN Pedersen, M Bak, MM Mehrjouy, … Scientific Reports 7 (1), 17893

Metasurface optical solar reflectors using AZO transparent conducting oxides for radiative cooling of spacecraft
K Sun, CA Riedel, Y Wang, A Urbani, M Simeoni, S Mengali, M Zalkovskij, … ACS Photonics 5 (2), 495-501

Study on microgratings using imaging, spectroscopic, and fourier lens scatterometry
JS Madsen, PE Hansen, P Boher, D Dwarakanath, JF Jørgensen, … Journal of Micro and Nano-Manufacturing 5 (3), 0

Optothermally actuated capillary burst valve J Eriksen, B Bilenberg, A Kristensen, R Marie. Review of Scientific Instruments 88 (4), 045101

Challenges in the integration of silicon SERS substrates into a polypropylene injection moulded microfluidic chip
Serioli, L., Morelli, L., Matteucci, M., Zor, K. & Boisen, A., 2017.
Research output: Contribution to conference › Conference abstract for conference – Annual report year: 2017 › Research › peer-review

Extraction And SERS Based Detection Of Bacterial Metabolites In Mixture On A Centrifugal Microfluidic Device
Morelli, L., Serioli, L., Centorbi, F. A., Matteucci, M., Demarchi, D., Zor, K. & Boisen, A., 2017. Research output: Contribution to conference › Conference abstract for conference – Annual report year: 2017 › Research › peer-review

High-Throughput Fabrication of Nanocone Substrates through Polymer Injection Moulding For SERS Analysis in Microfluidic Systems
Viehrig, M., Matteucci, M., Thilsted, A. H., Schmidt, M. S. & Boisen, A., 2017. 2 p. Research output: Contribution to conference › Conference abstract for conference – Annual report year: 2017 › Research › peer-review

Nanopillar Filters for Surface-Enhanced Raman Spectroscopy
Durucan, O., Rindzevicius, T., Schmidt, M. S., Matteucci, M. & Boisen, A., 2017, In : ACS Sensors. 2, 10, p. 1400-1404. Research output: Contribution to journal › Letter – Annual report year: 2017 › Research › peer-review

Batch fabrication of nanopatterned graphene devices via nanoimprint lithography
David M. A. Mackenzie, Kristian Smistrup, Patrick R. Whelan, Birong Luo, Abhay Shivayogimath, Theodor Nielsen, Dirch H. Petersen, Sara A. Messina, and Peter Bøggild. Appl. Phys. Lett. 111, 193103 (2017)

Optothermally actuated capillary burst valve
Johan Eriksen, Brian Bilenberg, Anders Kristensen, and Rodolphe Marie. Scientific Instruments 88, 045101 (2017)

2016

Comparison of Ultrasonic Welding and Thermal Bonding for the Integration of Thin Film Metal Electrodes in Injection Molded Polymeric Lab-on-Chip Systems for Electrochemistry 
Matteucci, M., Heiskanen, A., Zor, K., Emnéus, J. & Taboryski, R. J., In: Sensors. 16, 11, 12 p., 1795. (2016)

Plasmonic Colors: Toward Mass Production of Metasurfaces
Emil Højlund‐Nielsen Jeppe Clausen Tapio Mäkela Lasse Højlund Thamdrup Maksim Zalkovskij Theodor Nielsen Nello Li Pira Jouni Ahopelto N. Asger Mortensen Anders Kristensen. Advanced Materials Technologies, Vol. 1, Issue 7 (2016)

Optical two-beam trap in a polymer microfluidic chip
Palanco, M. E., Catak, D., Marie, R., Matteucci, M., Bilenberg, B., Kristensen, A. & Berg-Sørensen, K., 2016, Proceedings of SPIE 9922, Optical Trapping and Optical Micromanipulation XIII . SPIE – International Society for Optical Engineering, Vol. 9922. 10 p. (S P I E – International Society for Optical Engineering. Proceedings, Vol. 9922). Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings – Annual report year (2016)

User-friendly Scatterometry
MH Madsen, JS Madsen, B Bilenberg, D Dwarakanath, JF Jørgensen, … European Optical Society Annual Meeting, Berlin, Germany

Rapid Voltammetric Measurements at Conducting Polymer Microelectrodes Using Ultralow-Capacitance Poly(3,4-ethylenedioxythiophene):Tosylate
Meier, A. R., Matteucci, M., Vreeland, R. F., Taboryski, R. J. & Heien, M. L., 2016, In : Langmuir. 32, 32, p. 8009-8018 10 p. Research output: Contribution to journal › Journal article – Annual report year (2016)

Demonstration of a positron beam-driven hollow channel plasma wakefield accelerator
Spencer Gessner et al. Nature Communications 7, Article number: 11785 (2016)

Optical manipulation with two beam traps in microfluidic polymer systems
Khoury Arvelo, M., Matteucci, M., Sørensen, K. T., Bilenberg, B., Vannahme, C., Kristensen, A. & Berg-Sørensen, K., 2015, 2015 20th Microoptics Conference (MOC) . IEEE, 2 p. Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings – Annual report (2016)

2015

Fiber-Based, Injection-Molded Optofluidic Systems: Improvements in Assembly and Applications
Matteucci, M., Triches, M., Nava, G., Kristensen, A., Pollard, M. R., Berg-Sørensen, K. & Taboryski, R. J., 2015, In : Micromachines. 6, p. 1971-1983. Research output: Contribution to journal › Journal article – Annual report year (2015)

Residual layer-free Reverse Nanoimprint Lithography on silicon and metal-coated substrates
A Fernández, J Medina, C Benkel, M Guttmann, B Bilenberg, … Microelectronic Engineering 141, 56-61

Fabrication of Nano-Scale Patterned Sapphire Substrate for GaN Based Nanopillar LED
S Lim, K Rasmussen, B Bilenberg, H Ou. The 3rd European-Asian Workshop on Light-Emitting Diodes, 7

Smart plastic functionalization by nanoimprint and injection molding
M Zalkovskij, LH Thamdrup, K Smistrup, T Andén, AC Johansson, … Alternative Lithographic Technologies VII 9423, 94230T

Separation of cancer cells from white blood cells by pinched flow fractionation
W Bodmer, M Podenphant, N Ashley, K Koprowska, K Mir, M Zalkovskij, … Lab On a Chip: microfluidic and nanotechnologies for chemistry, biology, and …

Fast characterization of moving samples with nano-textured surfaces
Morten Hannibal Madsen, Poul-Erik Hansen, Maksim Zalkovskij, Mirza Karamehmedović, and Jørgen Garnæs. Optica, Vol. 2, Issue 4, pp. 301-306 (2015)

Injection molded microfluidic device for enrichment of somatic cells in cow milk
Jensen, M. P., Marie, R., Olesen, T., Matteucci, M. & Kristensen, A., 2014, Proceedings of Polymer Replication on Nanoscale 2014. 1 p. Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings (2015)

Designing visual appearance using a structured surface
Villads Egede Johansen, Kristian Smistrup, Theodor Nielsen et al. Optica, Vol. 2, Issue 3, pp. 239-245 (2015)

2014

Residual layer-free Reverse Nanoimprint Lithography on silicon and metal-coated substrates
A. Fernándeza et al. Microelectronic Engineering, Micro/Nano Fabrication 2014, Volume 141, 15 June 2015, Pages 56–61 (2014)

Angle-independent structural colors of silicon
E. Højlund-Nielsen et al. J. Nanophoton. 8(1), 083988  doi:10.1117/1.JNP.8.083988 (2014)

Injection molded pinched flow fractionation device for enrichment of somatic cells in cow milk
Jensen, M. P., Marie, R., Olesen, T., Matteucci, M. & Kristensen, A., 2014, In : Microelectronic Engineering. 124, p. 53-57 5 p. Research output: Contribution to journal › Journal article – Annual report year (2014)

Process variations in surface nano geometries manufacture on large area substrates
M. Calaon et al. Proceedings of the 14th euspe International Conference – Dubrovnik (2014)

Nanostructuring steel for injection molding tools
A. Al-Azawi, K. Smistrup and A. Kristensen. Journal of Micromechanics and Microengineering Volume 24 Number 5 (2014)

Nanoimprinted DWDM laser arrays on indium phosphide substrates
K. Smistrup et al. Microelectronic Engineering – DOI: 10.1016/j.mee (2014)

Injection molded pinched flow fractionation device for enrichment of somatic cells in cow milk
M. Pødenphanta et al. Microelectronic Engineering 124, pp. 53–57 (2014)

Bioinspired ultrahigh water pinning nanostructures
J. B. Law, A. Hua Ng, A. Y. He and H. Y. Low. Langmuir, 30 (1), pp 325–331 (2014)

2013

DNA barcoding via counterstaining with AT/GC sensitive ligands in injection-molded all-polymer nanochannel devices
Østergaard, P. F., Matteucci, M., Reisner, W. & Taboryski, R., 2013, In : Analyst. 138, 4, p. 1249-1255
Research output: Contribution to journal › Journal article – Annual report year: 2013 › Research › peer-review (2013)

Fabrication and characterization of injection molded multi level nano and microfluidic systems
Matteucci, M., Christiansen, T. L., Tanzi, S., Østergaard, P. F., Larsen, S. T. & Taboryski, R., 2013, In : Microelectronic Engineering. 111, p. 294-298 (2013)

Ion channel recordings on an injection-molded polymer chip
Tanzi, S., Matteucci, M., Christiansen, T. L., Friis, S., Christensen, M. T., Garnæs, J., Wilson, S., Kutchinsky, J. & Taboryski, R., 2013, In : Lab on a Chip. 13, 24, p. 4784-4793
Research output: Contribution to journal › Journal article – Annual report year: 2013 › Research › peer-review (2013)

Polymer multilevel lab-on-chip systems for electrochemical sensing
Matteucci, M., Larsen, S. T., Garau, A., Tanzi, S. & Taboryski, R. J., 2013, In : Journal of Vacuum Science and Technology. Part B. Microelectronics and Nanometer Structures. 31, p. 06F904-1
Research output: Contribution to journal › Journal article – Annual report year: 2013 › Research › peer-review (2013)

Single layer broadband anti-reflective coatings for plastic substrates produced by full wafer and roll-to-roll step-and-flash nano-imprint lithography
Marieke Burghoorn et al. Materials 2013, 6(9), 3710-3726 (2013)

Applications of nanometrology in polymer production
J. Garnaes et al. International Congress on Metrology, Paris, October (2013)

Well-defined microapertures for ion channel biosensors
E. HalzÌŒa, T. H. Bro, B. Bilenberg, and A. Koçer. Analytical Chemestry. 2013, 85, 811 ˆ’815 (2013)

DWDM laser arrays fabricated using thermal nanoimprint lithography on indium phosphide substrates
K. Smistrup, J. Nørregaard, A. Mironov, T. H. Bro, B. Bilenberg, O. Hansen, F. Khan, M. Emanuel, Y. Ma, Y. Zhang, A. Kristensen, S. Rishton. The 57th annual conference on electron, ion, and photon beam technology and nanofacrication, EIPBN ( 2013)

Simulation and experimental study of the effects of process factors on the uniformity of the residual layer thickness in hot embossing
F. Omar, A. Kolew, E. B. Brousseau, H. Hirshy. Journal of Micro- and Nano-Manufacturing, 2013 by ASME, Vol. 1 / 021002-1 (2013)

Modeling the constitutive and frictional behavior of PTFE flexible stamps for NIL
M.R. Sonne, J.H. Hattel. Microelectronic Engineering 106, 1—8, (2013)

2012

All polymer, injection molded nanoslits, fabricated through two-level UV-LIGA processes
Østergaard, P. F., Matteucci, M., Marie, R., Kristensen, A. & Taboryski, R. J., 2012, Nanotech 2012 Vol. 2 Nanotechnology 2012: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational. Vol. 2. p. 482-485. Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings – Annual report year (2012)

All-in-polymer injection molded device for single cell capture using multilevel silicon master fabrication
Tanzi, S., Larsen, S. T., Matteucci, M. & Taboryski, R., 2012, Technical Proceedings of the 2012 NSTI Nanotechnology. Conference and Expo. p. 376-379. Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings – Annual report year (2012)

Study of moiré grating fabrication on metal samples using nanoimprint lithography
M. Tang, H. Xie, J. Zhu, X. Li, and Yanjie Li. Optics Express, Vol. 20, Issue 3, pp. 2942-2955 (2012)

Replication of large area nanoimprint stamp with small critical dimension loss
M. FanTao, G. Le, W. ZhiWen, H. ZhiTao, C. JinKui. Science China – Technological Sciences, Vol.55 No.3: 600—605 (2012)

Microfluidic chip designs process optimization and dimensional quality control
M. Calaon, H. N. Hansen, G. Tosello, J. Garnaes, J. Nørregaard, W. Li. Journal Of Microsystem Technology – Heidelberg, December 3-5, (2012)

Printing colour at the optical diffraction limit
K. Kumar, H. Duan, R. Hegde, S. Koh, J. Wei, and J. Yang. Nature Nanotechnology. doi:10.1038/nnano.2012.128 (2012)

Production quality control of microfluidic designs
M. Calaon, H. N. Hansen, G. Tosello1, J. Garnaes, J. Nørregaard, M. Guttmann
Microfluidics 2012 – Heidelberg (2012)

A nanoporous silicon nitride membrane using a two-step lift-off pattern transfer with thermal nanoimprint lithography
Bhargav P Nabar, Zeynep Celik-Butler, Brian H Dennis and Richard E Billol
2012 J. Micromech. Microeng. 22 045012 (2012)

Conductive Polymer Microelectrodes for on-chip measurement of transmitter release from living cells
Larsen, S. T., Matteucci, M. & Taboryski, R. J., 2012, Proceedings of Nanotech Conference and Expo 2012. Vol. 2. p. 302. – 305. Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings – Annual report year (2012)

Fabrication of combined-scale nano- and microfluidic polymer systems using a multilevel dry etching, electroplating and molding process
Tanzi, S., Østergaard, P. F., Matteucci, M., Christiansen, T. L., Cech, J., Marie, R. & Taboryski, R. J., 2012, In : Journal of Micromechanics and Microengineering. 22, 11 p. Research output: Contribution to journal › Journal article – Annual report year (2012)

2011

Optical properties of gold and aluminium nanoparticles for silicon solar cell applications
T. L. Templea and D. M. Bagnall. Journal of Applied Physics 109, 084343 (2011)

Profiles of complex periodic structures determined by scatterometry
P-E. Hansen, B. Bilenberg, Y. R. Shen and M. Karamehmedovic. Proceedings of the 13th International Confeence on Metrology and Properties of Engineering Surfaces, Twickenham Stadium, UK, (2011)

2010

Vertical sidewall roughness measured by AFM and SEM
Jørgen Garnæs, Brian Bilenberg, Radu Malureanu, Jacob Markussen. Proceedings Nanoscale (2010)

Direct replication of nanostructures from silicon wafers in polymethylpentene by injection molding
R. Brucka, R. Hainbergera, R. Heera, N. Kataevaa, A. Köcka, M. Krapf-Güntherb, K. Kaiblingerb, F. Pipelkab,B. Bilenberg. Proc. SPIE Optics + Photonics (2010)

Microfabricated magnetic bead polydimethylsiloxane microarrays
Jenny Aveyarda, Tobias Hedegaard, Brian Bilenberg and Dan V. Nicolaua,
Microelectronic Engineering (2010)

Formation of nanopatterned polymer blends in photovoltaic devices
Ximin He, Feng Gao, Guoli Tu,David Hasko, Sven Huttner, Ullrich Steiner, Neil C. Greenham, Richard H. Friend, and Wilhelm T. S. Huck, Nano Letters, (2010)

2009

Nanopatterned polymethylpentene substrates fabricated by injection molding for biophotonic applications 
R. Hainberger, R. Brucka, N. Kataeva, R. Heer, A. Köck, P. Czepl, K. Kaiblinger, F. Pipelka and B. Bilenberg, Microelectronic Engineering, (2009)

Industrial applications demanding low and high resolution features realized by soft UV-NIL and hot embossing 
R. Miller, T. Glinsner, G. Kreindl, P. Lindner, M. Wimplinger, SPIE Advanced Lithography Proceedings (7271) (2009)

2008

Design and fabrication using nanoimprint lithography of a nanofluidic device for DNA stretching applications
E. Abad, S. Merino, A. Retolaza, A. Juarros, Microelectronic Engineering 85, 818—821 (2008)

2007

ICP etch processes for nanoimprint lithography
C.C.Welch, B. Bilenberg, Proceedings PESM (2007)

High-quality patterns produced by nanoimprint lithography and inductive coupled plasma etching
B. Bilenberg, C. C. Welch, Proceedings MNE (2007)

Scroll to Top